CBR600F2 Slip On

Discussion in 'WERA Vintage' started by Shawn A., Nov 19, 2021.

  1. Shawn A.

    Shawn A. Well-Known Member

    I need help!

    I brought a 1994 CBR600F2 back to life a couple years back and I want to put a period correct slip on exhaust on the bike. I have not had any luck finding what I want.

    I'm looking for a Two Brothers/Erion Racing/ Mike Velasco Racing(MVR) Slip on for it. But it must have the rolled, steel end cap and be spring mounted to the mid pipe.[​IMG]

    [​IMG]
    Like this one!

    Let me know if you have something
     
  2. Honda289

    Honda289 Member

    Stainless or would carbon fiber work?
     
  3. Shawn A.

    Shawn A. Well-Known Member

    either would be fine as I can always change out the sleeve if need be.
     
  4. Shawn A.

    Shawn A. Well-Known Member

    Finally got it done.

    1428.jpg
     
    JBall likes this.
  5. Shawn A.

    Shawn A. Well-Known Member

    I have another set of end caps, in this case, a set of Erion Racing end caps. So now I'm contemplating building another muffler. This time I'm thinking carbon fiber.
     
  6. Shawn A.

    Shawn A. Well-Known Member

    The Carbon Fiber tube arrives tomorrow.
     
  7. Shawn A.

    Shawn A. Well-Known Member

    The Carbon muffler is done. It looks great.

    [​IMG]
     
    chobes likes this.
  8. Shawn A.

    Shawn A. Well-Known Member

    Anyone out there have any steel end caps from a Two Brothers/Erion system or a battered muffler they want to get rid of?
     
  9. chobes

    chobes Well-Known Member

    I have a couple of D&D cans, not sure if that's what you're looking for as I don't think they're spring-mounted.
     
  10. Shawn A.

    Shawn A. Well-Known Member

    They aren't, however they are workable.

    What do you want for them? Are they rusty(the end caps)?
     
  11. chobes

    chobes Well-Known Member

    They're boxed up, I'll see if I can get them out this weekend and get some pictures for you.
     
  12. Shawn A.

    Shawn A. Well-Known Member

    ok

    Also, if you just want them rebuilt, I can do that as well.
     
  13. chobes

    chobes Well-Known Member

    I found a picture of the D&D slip ons. I'll need to get them out of the box to see if the top on is actually a D&D, as I noticed that the shell mounts over the end caps.

    IMG_0702.JPG
     

Share This Page