carburetor

Discussion in 'WERA Vintage' started by #156, Oct 17, 2021.

  1. #156

    #156 Well-Known Member

    Does anyone know someone i can get to rebuild my keihin cr31mm carbs ? Their are 4 in a line. Thanks.
     
  2. dave3593

    dave3593 What I know about opera I learned from Bugs Bunny

    Sudco, just Google Sudco carburetor.
     
  3. #156

    #156 Well-Known Member

    Thanks man i will check it out .
     
  4. Kurlon

    Kurlon Well-Known Member

    If you go Sudco, be sure to tear the carbs down once you get them back and go through them to make sure things that should be tight are, and look for any spots were threaded bosses were stripped resulting in new nuts where you weren't expecting them, etc. Depending on the age of the carb rack, I might suggest rebuilding yourself just so there are no surprises.
     
  5. TurboBlew

    TurboBlew Registers Abusers

    just get the kit and do it yourself. Its not hard. Syncing them might be challenging without gauges.
     

Share This Page