"alternative" bodywork FZRs

Discussion in 'WERA Vintage' started by az762nato, Feb 9, 2010.

  1. az762nato

    az762nato US Army

    400s or 600s, who has pics with non FZR fairings? Im looking to do something different with mine this year, so Im gathering ideas now and wanna see what others have done. Ive seen the TZ tail swap plenty of times, but what else? Thanks guys!
  2. getshokin

    getshokin Member

  3. pscook

    pscook Well-Known Member

    2nd gen YZF600 bodywork on '93 FZR600, Airtech FZR600 Supersport seat. The belly pan was a pain since the lower was open, but it came out okay after a good coat of paint.

  4. az762nato

    az762nato US Army

    I hadnt yet thought about full TZ body, only really the tail. I like the looks of the full TZ stuff though. I also though about an SRAD race tail. Ill have to look at the pics of the YZF stuff once I get home, the Army networks block photobucket stuff. Anyone else, keep them coming! Thanks guys!
  5. stickboy274

    stickboy274 Stick-a-licious Tire Dude

    1st gen YZF, or R6 of some generation
  6. 50Joe

    50Joe Registered User

    I've got a 1996 TZ250 upper and lower fairing I'll sell you for $100. I'll also throw in a front fender. The bodywork is rough but usable. I little fiberglass work and some paint and it would be good to go.
  7. gpracer15

    gpracer15 Built to Ride

  8. ahrma_581

    ahrma_581 Well-Known Member

    GSXR 1000, '01-'03, I think. FZR600

    Last edited: Feb 10, 2010
  9. ScottyRock155

    ScottyRock155 A T-Rex going RAWR!

    2002-2003 R1 Upper/Lower, no idea on the tail, was told it was some sort of Ducati tail.

  10. az762nato

    az762nato US Army

    hmm, Im getting more and more ideas now from you guys. I may have to start buying up a few spares from the board too..... One more thing, how are you guys spooling the swingarms that dont have threaded bosses for them? Just weld on a nut or something else?
  11. tz90369

    tz90369 Well-Known Member

    fzr400 with 96 TZ upper and tail

    used to fit with lower fairing too - but a few years, modifications, and crashes and I haven't even tried it lately.

    Attached Files:

  12. Motomeister13

    Motomeister13 Well-Known Member

    here is a comparison 88-90 400 vs 192 FZR600

    Oh, wait, you said no FZR's with FZR glass / TZ 250 tails. :D

    Attached Files:

  13. RxRC

    RxRC Well-Known Member

  14. jjgpbikes

    jjgpbikes jj mendez


    theres my baby before i parted her out on here
  15. grady anderson

    grady anderson Well-Known Member

    I know this is an old thread but I just got an FZR400 and this fairing is beautiful. Did you do the installation?
  16. notbostrom

    notbostrom DaveK broke the interwebs

  17. notbostrom

    notbostrom DaveK broke the interwebs

    PS congrats on the 400
  18. grady anderson

    grady anderson Well-Known Member

    Thanks. Been a long time coming.
    Finally a late night "hell yeah it's worth that" bid stood for two days and one morning I got the "congratulations you won!" Email
    Took it out for a ride yesterday (Friday) in a brief warm weather break
    That bike restarted my heart
    Way too nice and original to race.
    That said.....
    Obviously FZR race bodywork is the easiest way to get on track
    And it is going to be on track
    My apologies up front to the purists out there
  19. grady anderson

    grady anderson Well-Known Member

    Nice. Sharkskinz?
    Here is my starting point:
  20. notbostrom

    notbostrom DaveK broke the interwebs

    Yep sharks in front airtech tz tail rear

Share This Page