aftermarket cooler for your vintage racer!

Discussion in 'WERA Vintage' started by riversbikes, Jan 12, 2020.

  1. riversbikes

    riversbikes Well-Known Member

    Suzuki fitment, but could likely be adapted to other oil cooled bikes. Fittings for a bandit, but would work on a gsxr750, 1100, a 7/11 project, etc.
    Mine was briefly mounted and then removed. 8AN hoses and fittings to thread into the block as well as the bottom of the cooler.
    From the ebay ad:
    19 Row oil Cooler Kit
    Kit Includes
    1x 19 Row Cooler
    Top & Bottom Mounting Brackets
    2x Braided Oil Pipes
    2x Sump Adapters
    2X Washers
    Cooler Is Bottom Feed
    Cost 230 pound plus shipping -- I'd like $150 USD shiping included.
    oil cooler1.jpg
    Cooler is in great shape, some marring around the an fittings from the wrench (at the case end, not the cooler end). Oil tight, works great!
     
  2. riversbikes

    riversbikes Well-Known Member

Share This Page